The Ultimate Cleaner for Natural Stone Surfaces
Looking for a powerful solution to stubborn stains and residues on your tiles and stone surfaces? NanoScrub® Tile Cleaner by Aqua Mix® is a cutting-edge abrasive cream cleaner designed to tackle what standard cleaners can't. Utilising advanced NanoSTG™ technology, this formula penetrates deep into textured surfaces, dissolving built-up dirt, removing coatings, and eliminating light grout residue—including epoxy. Whether you're maintaining porcelain tiles, ceramic, natural stone, or masonry surfaces, NanoScrub® ensures a pristine finish without damaging your materials.
NanoScrub Key Features
- Penetrates deep to remove ground-in dirt and stubborn residues
- Eliminates factory waxes, floor coatings & mineral deposits
- Non-acidic & non-flammable formula – safe for various materials
- Innovative NanoSTG™ technology for superior cleaning power
- Low VOC content (0.6%) & pH balanced (9-10 alkaline)
Perfect for These Surfaces
NanoScrub® is versatile and can be used on a variety of surfaces, including:
- Porcelain & Ceramic Tiles
- Natural Stone (Granite, Marble, Travertine, Slate, Limestone)
- Grout, Quarry Tile, Saltillo, Terra-cotta & Cement Pavers
- Masonry & Other Stone and Tile Surfaces

Limitations
While NanoScrub® is designed to be safe and effective, there are some limitations to be aware of:
- Not suitable for onyx, soft limestone, or highly polished surfaces.
- Avoid use on materials sensitive to abrasives.
NanoScrub Application Instructions
- Wear chemical-resistant gloves (nitrile recommended).
- Clear the surface of dust and debris by sweeping or vacuuming.
- Pre-wet the surface with a generous amount of water.
- Apply NanoScrub® directly onto the wet surface.
- Scrub using a nylon pad, brush, or machine for effective stain removal.
- Rinse thoroughly to ensure no residue remains.
- Boost cleaning power by mixing NanoScrub® with any Aqua Mix® cleaner.
Cleaning of Equipment
Rinse tools with water immediately after use to prevent product build-up.
The Ultimate Cleaner for Natural Stone Surfaces
Looking for a powerful solution to stubborn stains and residues on your tiles and stone surfaces? NanoScrub® Tile Cleaner by Aqua Mix® is a cutting-edge abrasive cream cleaner designed to tackle what standard cleaners can't. Utilising advanced NanoSTG™ technology, this formula penetrates deep into textured surfaces, dissolving built-up dirt, removing coatings, and eliminating light grout residue—including epoxy. Whether you're maintaining porcelain tiles, ceramic, natural stone, or masonry surfaces, NanoScrub® ensures a pristine finish without damaging your materials.
NanoScrub Key Features
- Penetrates deep to remove ground-in dirt and stubborn residues
- Eliminates factory waxes, floor coatings & mineral deposits
- Non-acidic & non-flammable formula – safe for various materials
- Innovative NanoSTG™ technology for superior cleaning power
- Low VOC content (0.6%) & pH balanced (9-10 alkaline)
Perfect for These Surfaces
NanoScrub® is versatile and can be used on a variety of surfaces, including:
- Porcelain & Ceramic Tiles
- Natural Stone (Granite, Marble, Travertine, Slate, Limestone)
- Grout, Quarry Tile, Saltillo, Terra-cotta & Cement Pavers
- Masonry & Other Stone and Tile Surfaces

Limitations
While NanoScrub® is designed to be safe and effective, there are some limitations to be aware of:
- Not suitable for onyx, soft limestone, or highly polished surfaces.
- Avoid use on materials sensitive to abrasives.
NanoScrub Application Instructions
- Wear chemical-resistant gloves (nitrile recommended).
- Clear the surface of dust and debris by sweeping or vacuuming.
- Pre-wet the surface with a generous amount of water.
- Apply NanoScrub® directly onto the wet surface.
- Scrub using a nylon pad, brush, or machine for effective stain removal.
- Rinse thoroughly to ensure no residue remains.
- Boost cleaning power by mixing NanoScrub® with any Aqua Mix® cleaner.
Cleaning of Equipment
Rinse tools with water immediately after use to prevent product build-up.