Professional Tile & Stone Cleaner
Aqua Mix® Non-Cement Grout Haze Remover is the ultimate solution for removing grout haze from tile and natural stone surfaces. This professional-grade cleaner is specifically designed to tackle Component®, premixed, urethane, and light epoxy grout residue without damaging your surfaces. Its non-acidic formula ensures safe and effective cleaning, making it a must-have for tile and stone maintenance.
Non-Cement Grout Haze Remover Key Features
- Effectively removes single-component, urethane, and light epoxy grout haze
- Non-acidic, safe formula for delicate surfaces
- Low VOC content (25 grams per litre) ensures minimal environmental impact
Perfect for These Surfaces
Non-Cement Grout Haze Remover is versatile and can be used on a variety of surfaces, including:
- Natural stone (granite, limestone, slate, travertine)
- Ceramic and porcelain tiles
- Quarry tiles and Saltillo

Limitations
While Non-Cement Grout Haze Remover is designed to be safe and effective, there are some limitations to be aware of:
- Do not apply on non-recommended surfaces
- Avoid excessive water during cleanup to prevent grout pigment loss
- Do not scrub directly on grout joints to prevent damage
- For heavy epoxy grout haze or residue cured beyond 7 days, use Aqua Mix® Sealer & Coating Remover
Non-Cement Grout Haze Remover Application Instructions
- Wear chemical-resistant gloves (nitrile recommended) and eye protection before handling.
- Ensure grout has cured for at least 24 hours.
- Remove debris by sweeping or vacuuming the surface.
- Apply the solution and allow it to dwell:
- Single Component, Premixed & Urethane Grout: 5-10 sec (24 hrs cure), 1 min (4-7 days), 3-5 min (28+ days)
- Light Epoxy Haze: 2-3 min (24 hrs cure), 5 min (4-7 days)
- Agitate with a white nylon scrub brush or pad.
- Wipe away the solution and avoid letting it dry on the surface.
Cleaning of Equipment
Rinse tools with water immediately after use to prevent product build-up.
Professional Tile & Stone Cleaner
Aqua Mix® Non-Cement Grout Haze Remover is the ultimate solution for removing grout haze from tile and natural stone surfaces. This professional-grade cleaner is specifically designed to tackle Component®, premixed, urethane, and light epoxy grout residue without damaging your surfaces. Its non-acidic formula ensures safe and effective cleaning, making it a must-have for tile and stone maintenance.
Non-Cement Grout Haze Remover Key Features
- Effectively removes single-component, urethane, and light epoxy grout haze
- Non-acidic, safe formula for delicate surfaces
- Low VOC content (25 grams per litre) ensures minimal environmental impact
Perfect for These Surfaces
Non-Cement Grout Haze Remover is versatile and can be used on a variety of surfaces, including:
- Natural stone (granite, limestone, slate, travertine)
- Ceramic and porcelain tiles
- Quarry tiles and Saltillo

Limitations
While Non-Cement Grout Haze Remover is designed to be safe and effective, there are some limitations to be aware of:
- Do not apply on non-recommended surfaces
- Avoid excessive water during cleanup to prevent grout pigment loss
- Do not scrub directly on grout joints to prevent damage
- For heavy epoxy grout haze or residue cured beyond 7 days, use Aqua Mix® Sealer & Coating Remover
Non-Cement Grout Haze Remover Application Instructions
- Wear chemical-resistant gloves (nitrile recommended) and eye protection before handling.
- Ensure grout has cured for at least 24 hours.
- Remove debris by sweeping or vacuuming the surface.
- Apply the solution and allow it to dwell:
- Single Component, Premixed & Urethane Grout: 5-10 sec (24 hrs cure), 1 min (4-7 days), 3-5 min (28+ days)
- Light Epoxy Haze: 2-3 min (24 hrs cure), 5 min (4-7 days)
- Agitate with a white nylon scrub brush or pad.
- Wipe away the solution and avoid letting it dry on the surface.
Cleaning of Equipment
Rinse tools with water immediately after use to prevent product build-up.