Enrich 'N' Seal Your Stone’s Natural Beauty
Aqua Mix® Enrich’N’Seal™ is a professional-grade, no-sheen enhancing sealer designed to enrich the natural character and beauty of unsealed stone. Powered by advanced Polycure™ Technology, it provides long-lasting stain resistance and superior protection for both interior and exterior surfaces.
Ideal for materials like marble, travertine, and limestone, Enrich’N’Seal™ also doubles as a pre-grouting sealer, making it a versatile solution for your stone care needs.
Enrich'N'Seal Key Features
- Enhances Colour & Texture: Restores the vibrant appearance of weathered or aged stone.
- Stain Protection: Provides up to 15 years of protection against stains.
- Pre-Grouting Use: Simplifies grout removal during installation.
- Moisture Transmission: Allows surfaces to breathe while staying protected.
- Low VOC Formula: Safe for use in environmentally sensitive areas. Maximum: 210g/L
Perfect for These Surfaces
Enrich'N'Seal® is versatile and can be used on a variety of surfaces, including:
- Natural Stone: Sandstone, slate, marble, limestone, granite, bluestone/basalt
- Unglazed Tiles: Porcelain, clay pavers, concrete, brick, masonry, terracotta
- Grout: Ideal for both interior and exterior applications
Limitations
- Avoid contact with non-recommended surfaces—product is not fully removable.
- Ensure complete removal of excess sealer within 5 minutes to prevent residue formation.
- Regular cleaning is required to maintain slip resistance.
- Does not prevent wear or etching from harsh chemicals or acids.
Pre-Grout Sealer/Grout Release
Porous tile and stone can be stained by grout during installation. Sealing the tile before grouting makes grout removal significantly easier.
- Apply a single coat of sealer according to the directions after the tile has been bonded for at least 24 hours.
- Alternatively, apply the sealer to the front face of the tile before installation.
- Wait a minimum of 48 hours before grouting to ensure proper sealing and curing.
IMPORTANT: Enhancing sealers should not be applied over a previously sealed surface. This includes surfaces pre-sealed with Aqua Mix® ProBlock or any other pre-sealer, as well as surfaces treated with Aqua Mix® Grout Release.
Pre-sealers and grout release products can cause enhancing sealers to highlight the stone unevenly, resulting in a patchy appearance. Ensure no prior treatments remain on the surface before applying Enrich’N’Seal™.
Preparation:
- Ensure surfaces are dry, clean, and free of waxes, sealers, or finishes.
- Allow new installations to dry for at least 48 hours before application.
- Protect surrounding surfaces to avoid accidental contact.
- Test in an inconspicuous area to confirm desired results.
- Ensure the stone, tile, or grout is completely dry before applying.
Enrich'N'Seal Application Instructions
- Apply the sealer using a sponge, brush, paint pad, or cotton towel.
- Avoid overlapping applications and apply from bottom to top for vertical surfaces.
- Wipe away excess sealer within 5 minutes using clean, absorbent towels.
- If applying multiple coats, allow at least 30 minutes of drying time between coats.
- Ensure no sheen or gloss remains; buff surfaces dry after application.
Drying Times
- Allow 30 minutes of drying time between coats at 20°C (70°F) and 70% relative humidity.
- Extend drying time if temperatures are lower or humidity is higher.
- Ready for foot traffic within 2 hours.
- Keep surfaces dry for at least 12 hours.
- Achieves full cure in a minimum of 48 hours.
Enrich'N'Seal Coverage
Achieve up to 40m² per litre, depending on the material and finish. Refer to the detailed coverage guide for specific surface types.
Coverage per Litre
| Material | Polished | Honed | Textured |
|---|---|---|---|
| Marble | 25–35m² | 15–20m² | 12–18m² |
| Limestone | 20–25m² | 8–12m² | 6–10m² |
| Travertine | 25–30m² | 15–25m² | 10–15m² |
| Granite | 30–40m² | 25–35m² | 20–30m² |
| Bluestone / Basalt | 25–35m² | 20–30m² | 15–25m² |
| Sandstone | 15–20m² | 10–15m² | 6–10m² |
| Slate | 20–30m² | 15–20m² | 10–15m² |
| Concrete | 15–25m² | 10–15m² | 6–10m² |
| Terrazzo | 20–25m² | 15–20m² | 10–15m² |
| Terracotta | N/A | N/A | 8–15m² |
Enrich 'N' Seal Your Stone’s Natural Beauty
Aqua Mix® Enrich’N’Seal™ is a professional-grade, no-sheen enhancing sealer designed to enrich the natural character and beauty of unsealed stone. Powered by advanced Polycure™ Technology, it provides long-lasting stain resistance and superior protection for both interior and exterior surfaces.
Ideal for materials like marble, travertine, and limestone, Enrich’N’Seal™ also doubles as a pre-grouting sealer, making it a versatile solution for your stone care needs.
Enrich'N'Seal Key Features
- Enhances Colour & Texture: Restores the vibrant appearance of weathered or aged stone.
- Stain Protection: Provides up to 15 years of protection against stains.
- Pre-Grouting Use: Simplifies grout removal during installation.
- Moisture Transmission: Allows surfaces to breathe while staying protected.
- Low VOC Formula: Safe for use in environmentally sensitive areas. Maximum: 210g/L
Perfect for These Surfaces
Enrich'N'Seal® is versatile and can be used on a variety of surfaces, including:
- Natural Stone: Sandstone, slate, marble, limestone, granite, bluestone/basalt
- Unglazed Tiles: Porcelain, clay pavers, concrete, brick, masonry, terracotta
- Grout: Ideal for both interior and exterior applications
Limitations
- Avoid contact with non-recommended surfaces—product is not fully removable.
- Ensure complete removal of excess sealer within 5 minutes to prevent residue formation.
- Regular cleaning is required to maintain slip resistance.
- Does not prevent wear or etching from harsh chemicals or acids.
Pre-Grout Sealer/Grout Release
Porous tile and stone can be stained by grout during installation. Sealing the tile before grouting makes grout removal significantly easier.
- Apply a single coat of sealer according to the directions after the tile has been bonded for at least 24 hours.
- Alternatively, apply the sealer to the front face of the tile before installation.
- Wait a minimum of 48 hours before grouting to ensure proper sealing and curing.
IMPORTANT: Enhancing sealers should not be applied over a previously sealed surface. This includes surfaces pre-sealed with Aqua Mix® ProBlock or any other pre-sealer, as well as surfaces treated with Aqua Mix® Grout Release.
Pre-sealers and grout release products can cause enhancing sealers to highlight the stone unevenly, resulting in a patchy appearance. Ensure no prior treatments remain on the surface before applying Enrich’N’Seal™.
Preparation:
- Ensure surfaces are dry, clean, and free of waxes, sealers, or finishes.
- Allow new installations to dry for at least 48 hours before application.
- Protect surrounding surfaces to avoid accidental contact.
- Test in an inconspicuous area to confirm desired results.
- Ensure the stone, tile, or grout is completely dry before applying.
Enrich'N'Seal Application Instructions
- Apply the sealer using a sponge, brush, paint pad, or cotton towel.
- Avoid overlapping applications and apply from bottom to top for vertical surfaces.
- Wipe away excess sealer within 5 minutes using clean, absorbent towels.
- If applying multiple coats, allow at least 30 minutes of drying time between coats.
- Ensure no sheen or gloss remains; buff surfaces dry after application.
Drying Times
- Allow 30 minutes of drying time between coats at 20°C (70°F) and 70% relative humidity.
- Extend drying time if temperatures are lower or humidity is higher.
- Ready for foot traffic within 2 hours.
- Keep surfaces dry for at least 12 hours.
- Achieves full cure in a minimum of 48 hours.
Enrich'N'Seal Coverage
Achieve up to 40m² per litre, depending on the material and finish. Refer to the detailed coverage guide for specific surface types.
Coverage per Litre
| Material | Polished | Honed | Textured |
|---|---|---|---|
| Marble | 25–35m² | 15–20m² | 12–18m² |
| Limestone | 20–25m² | 8–12m² | 6–10m² |
| Travertine | 25–30m² | 15–25m² | 10–15m² |
| Granite | 30–40m² | 25–35m² | 20–30m² |
| Bluestone / Basalt | 25–35m² | 20–30m² | 15–25m² |
| Sandstone | 15–20m² | 10–15m² | 6–10m² |
| Slate | 20–30m² | 15–20m² | 10–15m² |
| Concrete | 15–25m² | 10–15m² | 6–10m² |
| Terrazzo | 20–25m² | 15–20m² | 10–15m² |
| Terracotta | N/A | N/A | 8–15m² |
